Back to Blog
Tips & Care 2026-11-16 The Usual 0 views

SquareHood Ricoh GR Glass: Haze vs Clear Care and Cleaning Tips

SquareHood Ricoh GR Glass: Haze vs Clear Care and Cleaning Tips

Learn how to protect and clean your SquareHood Ricoh GR glass, whether you chose the Haze or Clear filter. Practical care tips for GR III and GR IIIx users.

Why your SquareHood glass needs a simple routine

The SquareHood for Ricoh GR III and GR IIIx is designed to protect your camera's lens while keeping the pocketable footprint. The glass—whether you chose the 10% Haze or the Clear version—sits between your lens and the world, so it collects dust, fingerprints, and the occasional smudge. A few careful habits will keep it working as intended.

The hood attaches directly to the camera via a bayonet mount, with no third-party adapter needed. That secure fit means you can clean the glass without worrying about the hood shifting, but it also means the glass is always exposed when the hood is on. The supplied rubber cap and front cap are your first line of defense when the camera is not in use.

What the catalog confirms about your SquareHood glass

  • SquareHood Ricoh GR Glass for GR III & IIIx (Haze or Clear): The glass is clear and has an anti-scratch coating, and it comes with a front cap to protect the glass when the camera is not in use. The anti-scratch coating helps resist minor abrasions during cleaning, but it is not indestructible. The front cap is your primary protection between shoots.
    SquareHood Ricoh GR Glass for GR III & IIIx (Haze or Clear)
    SquareHood Ricoh GR Glass for GR III & IIIx (Haze or Clear)
  • SquareHood Ricoh GR Glass for GR III & IIIx (Haze or Clear): Each hood comes with a rubber cap to protect the glass. Use the rubber cap whenever the camera is in a bag or pocket to keep dust and debris off the glass.
  • SquareHood Ricoh GR Glass for GR III & IIIx (Haze or Clear): The hoods are bayonet mounted, so they attach directly to the camera, no third party adapter is required. The direct mount means the hood stays aligned with the lens, so you can clean the glass in place without removing the hood.

A safe cleaning routine for Haze or Clear glass

The steps below apply to both the 10% Haze and Clear versions. The Haze filter adds a subtle diffusion effect, but the glass surface and coating are the same, so the same care applies.

  1. Start with the caps: Keep the front cap on when the camera is not in use. Before cleaning, remove the cap and set it aside in a clean spot.
  2. Blow off loose dust first: Use a blower or gently brush away loose particles. This reduces the risk of scratching the anti-scratch coating during wiping.
  3. Use a clean microfiber cloth: Wipe the glass gently in a circular motion with a clean, dry microfiber cloth. Avoid paper products or clothing, which can trap grit.
  4. Check for smudges: If a smudge remains, breathe lightly on the glass and wipe again with a clean part of the cloth. Do not apply pressure.
  5. Replace the caps: Once clean, put the front cap back on if you are storing the camera. The rubber cap can also be used for extra protection in a bag.

Haze vs Clear: same care, different look

The 10% Haze filter is designed to add a subtle haze effect to your images, while the Clear filter is designed to be optically clear. Both versions share the same anti-scratch coating and the same physical construction, so neither requires a different cleaning approach.

If you are switching between the two, handle each glass element by the edges and keep the unused one in a clean case. The catalog does not specify a storage case for the glass alone, so use the supplied caps and a soft pouch if you have one.

Habits that keep GR glass clear longer

These habits are not from the manufacturer's instructions—they are practical suggestions based on the product's design and common sense. The catalog does not provide a detailed care protocol, so treat these as general guidance.

  • Cap it when you pocket it: The Ricoh GR is prone to dust getting into the lens, and the hood is meant to protect the lens while maintaining the small footprint. Use the front cap whenever the camera goes into a pocket or bag.
  • Avoid touching the glass: Handle the hood by its edges. Fingerprints are easier to prevent than to remove, especially on the Haze version where smudges can affect the diffusion effect.
  • Keep a microfiber cloth handy: A small cloth in your bag lets you address smudges before they bake in. Avoid using the same cloth for both the glass and the camera body to prevent cross-contamination.
  • Inspect before and after shoots: A quick look at the glass before you start shooting can save you from soft or hazy images caused by a dirty filter.

What the catalog does not tell you

The supplied product information does not include specific cleaning solutions, drying times, or recommended cleaning frequencies. It also does not state whether the glass can be removed from the hood for cleaning. If you need to clean more aggressively, or if the glass becomes damaged, contact the manufacturer or a professional camera service for advice.

The anti-scratch coating helps protect against minor abrasions, but it is not a guarantee against scratches from grit or improper cleaning. Always start with the least aggressive method and work up only if needed.

Related Articles

Customer Service
Home
Products
Cart
Profile