What the Model V changes for X100 owners
The SquareHood Model V is an aluminium lens hood made for Fuji X100 series cameras, including the X100VI. This updated version is specifically noted as fixing the gap on the X100VI, so if that gap has been your reason to hesitate, the record addresses it directly.
The hood uses a two-piece design with an inner sleeve that supports filters. That means you can keep a filter in place while the hood is mounted, rather than choosing one or the other. A small window is also built in to minimise obstruction of the optical viewfinder, which matters if you shoot with the OVF rather than the EVF.
Model V details that affect fit and use
- SquareHood Model V for Fuji X100 Cameras - Silver: Updated model that fixes the gap on the X100VI. If you use an X100VI, this is the version intended to close that gap rather than leave it exposed.

SquareHood Model V for Fuji X100 Cameras - Silver - SquareHood Model V for Fuji X100 Cameras - Silver: Two-piece design with an inner sleeve that supports filters. You can mount a filter and the hood together, so the hood does not force you to remove filtration.
- SquareHood Model V for Fuji X100 Cameras - Silver: Small window to minimise obstruction of the optical viewfinder. Useful if you rely on the OVF and want to keep more of your view clear.
Aligning the hood without guesswork
The supplied record does not include a step-by-step installation procedure, torque values, or alignment marks. That is a real limitation: it means you should not expect this article to tell you exactly how many turns to make or which mark lines up with which. Instead, treat the two-piece design as the key clue. The inner sleeve supports filters, so the hood is intended to sit around that sleeve rather than press directly onto the filter glass.
If alignment feels off, check that the inner sleeve is seated correctly and that any filter is fully threaded before you judge the hood's fit. The record confirms the sleeve supports filters but does not specify a maximum filter thickness or a recommended tightening order. Those details are not confirmed by the supplied information, so verify them with the retailer or manufacturer before forcing anything.
Silver finish: what to expect and how to care for it
The Model V in silver is an aluminium hood, and the finish is part of its appeal on a silver X100 body. Aluminium is lightweight and rigid, but the record does not include a coating specification or a care routine. What you can do is keep the finish clean with a soft, dry cloth and avoid abrasive cleaners or gritty cloths that could dull the surface. Do not use solvent-based cleaners unless the manufacturer confirms they are safe.
Because the hood includes a window for the viewfinder, pay attention to that area when cleaning. A soft brush or blower can lift dust from the window without scratching it. The record does not confirm whether the window is glass or another material, so treat it as delicate and avoid pressing hard.
Fit checkpoints before you commit
- Confirm your camera model: The record lists Fuji X100 series cameras including the X100VI. If you use a different X100 generation, the gap fix is specifically tied to the X100VI, so check compatibility for your body before ordering.
- Test with your filter: The inner sleeve supports filters, but the record does not state a maximum filter height or whether stacked filters work. Try your usual filter first and check that the hood seats fully.
- Check the viewfinder window: The small window is designed to minimise OVF obstruction. Look through the viewfinder with the hood mounted to confirm the window lines up with your eye position.
- Inspect the finish on arrival: Silver anodised or painted aluminium can show marks. Check the hood under good light before first use and keep the packaging until you are satisfied.
When the Model V is the right choice
Choose the silver Model V if you want an aluminium hood that addresses the X100VI gap, supports a filter through its inner sleeve, and keeps more of the optical viewfinder clear. It is a considered accessory rather than a generic hood, and the two-piece build is the main reason to pick it over a simpler screw-on design.
Skip it if you need confirmed installation torque, a stated filter thickness limit, or a documented cleaning regimen. The supplied record does not provide those details, and guessing them could risk your camera or the finish. In those cases, ask the seller for the missing specifications before you buy.


