SquareHood for Leica Elmarit 28mm f/2.8: Mount Fit Guide

Quick answer

The SquareHood mounts directly onto the filter threads of your Elmarit 28mm f/2.8 (11809). It is smaller than Leica's hood, allows a 46mm filter, and includes a cutout for a less obstructed view.

Mounting steps

1. Clean the filter threads: Use a blower or soft brush to remove dust from the lens filter threads. Any debris can cause the hood to sit unevenly or cross-thread. A clean thread ensures smooth engagement and prevents scratches.
2. Align the hood with the lens: Hold the SquareHood so the cutout faces the top or side of the frame (your preference). Do not force it—if it does not start easily, recheck alignment. The cutout orientation is personal; try both to see which gives you a better view.
3. Screw the hood clockwise: Turn the hood gently until it stops. Do not overtighten—aluminium threads can strip. If you feel resistance early, stop and realign. A snug fit is enough; the hood will not loosen during normal use.
4. Attach the plastic cap: Press the included click-on cap into the hood's front opening. It should snap securely. Remove it before shooting to avoid vignetting. Store the cap in your bag when shooting; it's easy to misplace.
5. Test the viewfinder clearance: Look through the viewfinder (or live view) to confirm the hood does not block the frame corners. The cutout is designed to reduce obstruction, but check at your lens's widest aperture. If you see the hood edge, rotate it slightly—the cutout should align with your shooting eye.

Product details

• SquareHood for Leica Elmarit 28mm f/2.8 (11809): This hood mounts to the filter threads and allows the use of a 46mm filter. You can keep a UV or polarizing filter attached under the hood without removing it, saving time in changing light.